SLS Camera Tablet combined with a Large Size Heavy Duty Case!
**Same Kinect SLS system 10″ tablet that has superior battery life span and will also run on AC power while using the camera.
Each order is Made to order! Please Allow build and shipping time *
Your order includes the following:
- Mobile SLS Kinect Unit
- 10″ Tablet w windows installed
- 12V rechargeable power supply
- Stable Handgrip
- Easy Initial Set up
- Programs Installed to run the SLS Camera.
- Screen Capture Software installed
Your Tablet can also be used when not connected to the SLS for:
- EVP Software
- Dual Cameras for Pics/Video
- Audio Recording and More
LARGE Heavy Duty Case
Heavy Duty case just the right size for the 10” SLS Camera and all of its components!
Perfect for the SLS DELUXE Camera System
Inside Length: 17.87 in.
Inside Height: 6.25 in.
Inside Width: 12.87 in.
Record Video with Sound
Your unit is installed with a Screen Capture software in order for you to document your SLS Cam sessions. This includes sound as well as the Kinect imaging.
PLEASE NOTE: Using the screen recording software will greatly reduce your tablet’s battery life. It should only be used when activity is seen. You CAN run a USB chord to your laptop if you choose. Otherwise, I strongly recommend using a separate camcorder to record activity captured by your SLS camera. Capturing also your response and reaction.
Kinect Sensor xbox 360
Your unit has been modified to use the Kinect xbox 360 sensor and is powered by a rechargeable battery supply.
PLEASE NOTE: The Kinect Sensors used to make these cameras are no longer in production. The Sensor you will receive is either used or remanufactured and will show varying signs of previous use.The internal components are in perfect working order and have been tested.
Your Kinect Cam will come with a grip/handle. Although a mobile device, I have found that using a sturdy full-size tripod with tilt abilities works best for me to monitor a room.* (* Full-size tripod not included comes with grip only ). PLEASE NOTE: No longer comes with mini tripod as these were a bit flimsy and not up to our standards. Most people use the device in hand or set up in a room on a sturdy tripod with Tilt abilities.
Does It Work?
This device is an experimental research tool. We suggest you utilize this device like you would with any paranormal device or gadget. Run experiments. Log and catalog your data. Any anomalies captured record and collect for study. Post your results. If you notice any false positives or glitches, please let us know and share with us. If and when you capture any strange anomalies, also please share so we can review and discuss with the paranormal community.
Joe, the engineer who modifies cameras for us and put this device together for his own use before states:
“I can’t express how blown away I was with this camera when I was testing it out for the first few sessions. Within no time, I had captured a small entity perched on my shoulders and responding to my vocal requests. Later, a figure no more than 3 feet tall stood on my right side and proceeded to hold my hand on request.
Needless to say, I must harbor many beings within the confines of my work area because of the work I do on a daily basis. The downside is that I hadn’t yet installed the recording software and so no video of my experiences exists.” – Joe
Please, share with us your results in regards to this new experimental SLS cam.
What does it do?
This camera will detect humans and animals in absolute darkness or full light. It also seems to see anomalies when there is nothing there the naked eye can see. We assume this to be spirits if and when they respond to direct communication via requests and responsive actions. Not just showing up and disappearing randomly. You can record video directly to the tablet or to SD card. Make sure to record your sessions.
Here’s how it works:
It runs off of a rechargeable battery pack for up to 4 hours of continuous use (dependent on settings).
It uses an RGB camera with depth sensor and infrared light projector with a monochrome CMOS sensor which sees everything not as a flat image, but as dots arranged in a 3D environment. These 1000’s of infrared dots allow the camera to “see” depth and detail like a sonar.
The installed software can recognize people by distinguishing body parts, joints and movements.
It shows a person-shaped object on the screen that you cannot see with the naked eye then there is something there ( anomalies) the IR is detecting and the programming is recognized as a human shape based on body parts and joints together.
*NOTE TIME TO BE BUILT – SHIPPING & DELIVERY INFO***:
These are individually made cameras so please allow 7-10 working days for shipping. Due to size of shipment shipping P&H is roughly $25 domestic and $49-$60 International. We allow the store to say IN STOCK to allow customers to order this item. Otherwise you wont be able to order.
NOTE: This is an Experimental research tool modified and packaged for paranormal research for paranormal investigators, ghost hunters and psychical researchers to use test and share results. This paranormal modified product is Not affiliated in any way with Kinect, Xbox or Microsoft and being sold only for research and testing purposes.
“The Kinect software included with this camera is not sold but installed for your use and is free to anyone. *Microsoft and Kinect is are the property of and copyright of Microsoft Inc and is not affiliated with Ghost Outlet.