REM-POD-EMT vers. 2.0 w Programmable EMF Field, Cold Spot Detection, REM boost – Brand new 2020/2021 model

1 in stock ready to ship.

New Official Version 2.0 REM-POD-EMT with Programmable EM Field, Hot & Cold Spot Detection, REM Sensitivity Boost and removable screw-in antenna:

This item will ship direct from manufacturer (drop ship) or if we have in stock will ship to you right away. Please allow an additional 1-3 days.

The REM-Pod-EMT provides manual and automatic baseline correction in addition to a programmable 5-Step REM sensitivity “range” adjustment. The EMT also has a +5/-5 degree ambient temperature Hot & Cold spot detection with ascending tones for “+” temperature change, and descending tones for “-” temperature changes. A momentary Blue LED is used for “-” and a Red LED is used to indicate “+” temperature trends

Specifications

• New Version 2.0 with REM Sensitivity Boost includes a +/- 7″ EM Field
• Easy to View Bright Red, Green, Blue, Yellow & Purple LED Indication
• Audible Tones Correlating To Field Disturbance
• Back light Allows Easy Visibility in The Dark
• 5-Step Programmable REM Sensitivity allows Instantaneous Response To Field Fluctuations & Spikes
• +5 / -5 Degree Audible and Visual Hot and Cold Spot Detection
• Temperature “Zero” (Baseline)
• Auto and Manual REM “Zero” (Baseline)
• Removable Screw-in Antenna
• 9Vdc Alkaline Battery Included
• 1 Year Warranty

Specification Difference – REM-Pod-EMT (Rev 1.0) vs REM-Pod-EMT (Rev 2.0) essentially all specifications are similar with the exception of the enhanced sensitivity detection range on the new Rev 2.0 model. The new REM-Pod-EMT Rev 2.0 defaults to a sensitivity setting that when turned on, is equal to the highest sensitivity setting of our previous REM-Pod-EMT Rev 1.0 model. The user can then make an informed decision based on environmental conditions to elevate the sensitivity four more steps which doubles the detection range of our previous Rev 1.0 model. It is important to understand that this detection sensitivity may need to be adjusted downward should you encounter external interference. Interference will be noted by a random blinking green LED. The intent of this extreme sensitivity modification is to try and amplify weaker interactive energy and to also detect energy at a greater distance.

(NOTE: Make sure to turn off cell phones, and walkie-talkies as this can cause FALSE POSITIVES – improperly setting the device off and assuming it is spirit contact. )

These Rem Pods come with thick brown paper labels that have to be peeled off the top. This is to protect the red enamel coating underneath. Also, there is no bottom to these. They come open face to easily remove battery and press button underneath. This is how they are made and shipped out by the engineer/manufacturer.

***Make and delivery: These are handmade.  If not in stock and on BACK ORDER then please ALLOW 1-3 weeks for them to be made and shipped.  So please be patient or email us to find out if we have any that will ship sooner. Sometimes engineer has one or two pre-made for us to ship in 2-3 days.